|
CCM460鉆機
收藏
CCM46O是新型、高效、半機械化接卸鉆桿，具有結構簡單、使用輕便、輔助時間短、風耗小等特點。鉆機通過提高沖擊功和沖擊頻率，保證了進尺快、效率高。根據巖石情況及穿爆、錨索工藝的要求，用改變過渡接頭的方式使之成為多孔徑潛孔鉆機，能夠鉆鑿φ70～150mm孔徑，巖石在普氏硬度系數f=8～16范圍內都能獲得很高的鑿巖速度，是露天鉆鑿*孔、錨索孔、采礦鉆鑿大孔徑的深孔，掘進主巷道，準備巷道，管棚孔，削頂孔及預裂孔和開采破碎必不可少的鑿巖設備。 CCM46O is a new, efficient, semi mechanized loading and unloading drill rod, and has the characteristics of simple structure, easy use, auxiliary time is short, small air consumption. Drill through improving the impact energy and impact frequency, ensure the footage quickly, high efficiency. According to the rock and blasting, anchor cable technology, by changing the transition joint way to become multi aperture DTH Drill to drill, with 70 ~ 150mm diameter, rock can obtain the drilling speed is very high in the Platts hardness ratio range of f=8 ~ 16, is deep open pit drilling blasting, anchorage cable hole drilling, mining large aperture, driving the main roadway, preparation roadway, pipe shed hole, cut off the top hole and pre splitting holes and broken rock drilling equipment essential for mining.
技術參數: 鉆孔直徑:80-150 回轉速度:0-120rpm 回轉扭矩:3400N.m 最大推進力:1600Kgf 最大提升力:3200Kgf 柴油機功率:56Kw/電機37KW 柴油機型號：玉柴4018 鉆臂最大水平擺角:45度左/45度右 鉆臂最大垂直俯仰角度:40度上/15度下 滑架最大擺角:10度左/91度右 一次推進行程:3000mm 配用空壓機流量:大于等于11立方/分鐘 配用空壓機壓力:大于等于0.8Mpa 液壓系統壓力:16Mpa 最大行走速度:2.5/3.5Km/h（雙速） 爬坡角度:20度 履帶寬度:250mm 鉆機重量:5t 運輸尺寸:5500mm*2400mm*2100mm 離地間隙:300mm 滑架補償長度:800mm Technical parameters: Bore diameter: 80-150 Rotary speed: 0-120rpm The rotary torque: 3400N.m The maximum thrust force: 1600Kgf Maximum lifting force: 3200Kgf The power of the diesel engine: 56Kw Diesel model: Yuchai 4018 The maximum horizontal drilling arm swing angle: 45 degrees /45 degrees right left Drill arm maximum vertical pitch angle: 40 degrees /15 degrees The sliding frame maximum pendulum angle: 10 degrees /91 degrees right left A push stroke: 3000mm Equipped with air compressor flow: greater than or equal to 11 cubic meters / minute Equipped with air compressor pressure: greater than or equal to 0.8Mpa Hydraulic system pressure: 16Mpa Maximum walking speed: 2.5Km/h The climbing angle: 20 degrees Track width: 250mm Weight: 5T Transport size: 5500mm*2400mm*2100mm Ground clearance: 300mm The sliding frame compensation length: 800mm
相關產品
|
